| |
MOLD
INSPECTION
ORANGE COUNTY -
MOLD INSPECTOR
MOLD DETECTION DOGS, AFFORDABLE,
THERMAL IMAGING, MOLD ALLERGY
Mold,
Molds, Moisture, Mildew,
Allergy, Asthma, Spore, Mould, Moldy, Certified Mold Inspection,
Mold Testing, Toxic Mold Testing, Black Mold, Mold Remediation,
Indoor Air Quality, Mold Abatement, Leak
Inspections, Mold
Spores, Water Damage, Odor Removal, Damp
|
|
Services Certified
Mold Inspections Thermal
Imaging Mold
Detection Dogs Leak
Inspections Toxic
Mold Testing
|
|
 |
| |
|
|
CONTACT
US:
|
|
MOLD
INSPECTOR
ORANGE
COUNTY
.com
Phone: (949)589-8909
CELL: 949-702-4221
J.L.C.
Inspections
94 Frontier St.
Trabuco Canyon, CA 92679
|
 |
| |
|
| |
|
| |
|
|
|
|
| |
MOLD
INSPECTION ORANGE COUNTY - MOLD INSPECTOR, MOLD DETECTION
DOGS, AFFORDABLE, THERMAL IMAGING, MOLD EMERGENCY,
Mold, Molds, Moisture, Mildew, Allergy, Asthma,
Spore, Mould, Moldy, Mold Testing, Leak Inspections, Toxic
Mold Testing, Black Mold, Mold Remediation, Indoor Air
Quality, Mold Abatement, Mold Spores, Water Damage, Odor
Removal, Damp, IAQ, Mold Allergy, Fungus, Fungi, How
to Kill Mold, Symptoms Mold, Mold Exposure, Mold Test,
Mold and Mildew, Wood Mold, Drywall Mold, Mold Exposure,
Mold Cleanup, Bathroom Mold, Home Inspections, Building
Inspections, Water Damage Inspections, Mold Mildew, House
Mold, toxic
mold Orange County, Los Angeles mold inspection, Los Angeles
mold inspector, mold inspection in Los Angeles, mold inspector
Los Angeles, mold testing Los Angeles, Orange County mold
inspection, Orange County mold inspector, toxic mold Los
Angeles, toxic mold test Los Angeles, orange county mold,orange
county,mold inspection, ca,california public health,orange
county mold inspector,hazmat inspector,toxic mold inspection,
Orange County California mold inspection shows 26 molds
are commonly found in water-damaged properties. Orange County
homes, Orange County schools, and Orange County businesses
are at high risk of indoor mold growth. An Orange County
mold inspector can answer your mold questions.mold remediation,
mold inspection, mold sampling, mold removal, mold testing,
mold clean up, mold cleanup, mold air sampling, toxic mold,
balck mold, mold inspection orange county, mold inspection
los angeles, toxic mold removal, balck mold cleanup, mold
assessment, mold abatement, mold surface sampling, mold
health effects toxic effects of mold, mildew, toxic mildew,
California Home Inspection, California Home Inspections,
Certified Home Inspections, Certified Home Inspectors, California
Mold Inspection, California Mold Inspections, Home Inspection,
Home Inspections, Home Inspectors, Home Inspection, Home
Inspections, Home Inspectors, Home Inspector, Home Inspection
checklists, Home Inspection checklist, Home Inspection Services,
House inspections, House inspection, property inspection,
California,Mold Testing, Toxic Mold, Black Mold, certified
mold inspector, certified home inspector Orange
County Water Damage, Orange County Water Damage Restoration,
Orange County Mold Remediation, Orange County Carpet Cleaning,Water
Extraction,Structure Drying,Plumber,Content Drying,Orange
County Mildecide,Debris Removal Service,Fire Damage,Mold
Removal,Mold Containment,Plumbing, Fire, Mold, Sewer, Dehumidifying,
Slab Leaks
Aliso Viejo 92656, 92698, Anaheim
92801, 92802, 92803, 92804, 92805, 92806, 92807, 92808,
92809, 92812, 92814, 92815,
92816, 92817, 92825, 92850, 92899, Atwood, 92811, Brea,
92821, 92822,92823, Buena Park, 90620 ,90621,90622, 90624,
Capistrano Beach, 92624, Corona del Mar, 92625, Costa Mesa,
92626, 92627, 92628, Cypress, 90630, Dana Point, 92629,
East Irvine, 92650, El Toro, 92609, Foothill Ranch, 92610,
Fountain Valley, 92708, 92728, Fullerton, 92831, 92832,
92833, 92834, 92835, 92836, 92837, 92838, Garden Grove,
92840, 92841, 92842, 92843 ,92844, 92845, 92846, Huntington
Beach , 92605, 92615, 92646, 92647, 92648, 92649, Irvine,
92602, 92603, 92604, 92606, 92612, 92614, 92616, 92617,
92618, 92619, 92620, 92623, 92697, La Habra, 90631, 90632,
90633, La Palma, 90623, Ladera Ranch, 92694, Laguna Beach
, 92651, 92652, Laguna Hills ,92653, 92654,92607,92677,
Laguna Woods, 92637,Lake Forest, 92630, Los Alamitos, 90720,
90721, Midway City, 92655, Mission Viejo, 92690, 92691,
92692,Newport Beach , 92658, 92659, 92660, 92661, 92662,
92663, 92657, Orange, 92856, 92857, 92859, 92862, 92863,
92864, 92865, 92866, 92867, 92868, 92869, Placentia, 92870,
92871, Rancho Santa Margarita 92688, San Clemente, 92672,
92673, 92674, San Juan Capistrano, 92675, 92693, Santa Ana
, 92701, 92702, 92703, 92704, 92705 ,92706, 92707, 92711,
92712, 92725.92735, 92799, Seal Beach , 90740, Silverado
92676, Stanton, 90680, Sunset Beach 90742, Surfside 90743,
Trabuco Canyon, 92678, 92679, Tustin ,92780, 92781,92782,
Villa Park, 92861, Westminster, 92683, 92684, 92685, Yorba
Linda, 92885, 92886, 92887 San
Diego 92101, 92102, 92103, 92104, 92105, 92106, 92107, 92108,
92109, 92110, 92111, 92112, 92113, 92114, 92115, 92116,
92117, 92118, 92119, 92120, 92121, 92122, 92123, 92124,
92126, 92127, 92128, 92129, 92130, 92131, 92132, 92133,
92134, 92135, 92136, 92137, 92138, 92139, 92140, 92142,
92143, 92145, 92147, 92149, 92150, 92152, 92153, 92154,
92155, 92158, 92159, 92160, 92161, 92162, 92163, 92164,
92165, 92166, 92167, 92168, 92169, 92170, 92171, 92172,
92173, 92174, 92175, 92176, 92177, 92178, 92179, 92182,
92184, 92186, 92187, 92190, 92191, 92192, 92193, 92194,
92195, 92196, 92197, 92198, 92199,
Los Angeles, 90001, 90002, 90003, 90004, 90005, 90006, 90007,
90008, 90009, 90010, 90011, 90012, 90013, 90014, 90015,
90016, 90017, 90018, 90019, 90020, 90021, 90022, 90023,
90024, 90025, 90026, 90027, 90028, 90029, 90030, 90031,
90032, 90033, 90034, 90035, 90036, 90037, 90038, 90039,
90040, 90041, 90042, 90043, 90044, 90045, 90046, 90047,
90048, 90049, 90050, 90051, 90052, 90053, 90054, 90055,
90056, 90057, 90058, 90059, 90060, 90061, 90062, 90063,
90064, 90065, 90066, 90067, 90068, 90069, 90070, 90071,
90072, 90073, 90074, 90075, 90076, 90077, 90078, 90079,
90080, 90081, 90082, 90083, 90084, 90086, 90087, 90088,
90089, 90091, 90093, 90094, 90095, 90096, 90097, 90099,
90101, 90102, 90103, 90174, 90185, 90189, 91331, 91335,
Beverly Hills, 90209, 90210, 90211, 90212, 90213, Glendale,
91201, 91202, 91203, 91204, 91205, 91206, 91207, 91208,
91209, 91210, 91214, 91221, 91222, 91224, 91225, 91226,
|
|
|
WELCOME TO:
MOLD INSPECTOR ORANGE COUNTY (JLC
Inspections)
JLC
Inspections,
Inc. is the only Mold Inspection Company in Orange County that
can offer you the benefits of Mold Detection Dogs as a standard
practice in performing mold inspections. JLC Inspections, Inc.
performs inspections in the same manner as other environmental
inspectors, but adds the benefit of their incredible sense of
smell. Mold Dogs generate
quicker and more accurate results, which lead to lower testing
and remediation costs for homeowners and insurance company alike.
Schools, hotels, commercial structures and government buildings,
have a proven track record for substantial cost savings when using
Mold Detection Dogs.
Jack Clausen,
the primary inspector for JLC Inspections, is also one of the
few inspectors in the Nation that holds the prestigious mold certification
of a Council Certified Microbial Consultant ( CMC ).
This prestigious certification is held by less than 400 mold inspectors
Nationwide, requiring a minimum of 8 years of field experience
and training. A CMC is the person all other mold
inspectors come to when they experience something new and need
advice. Jack Clausen also sits on the advisory board for the American
Indoor Air Quality Council assisting in the approval
process of all A.I.A.Q.C. mold inspectors across the nation. Click
here to view more qualificatioins.
|
|
Jack
Clausen is the owner and primary inspector for
JLC Inspections, Inc. During the past 30 years,
he has gained a very broad knowledge of the construction
industry as it relates to building defects, environmental
concerns such as Mold and Allergens, and is also
one of the countries Certified Thermographers.
More
Info |
|
|
Hershey
and Trace have been trained to search for microbial
odor and to detect the source. This is a very
successful method for locating hidden microbial
damage.
More Info |
|
|
|

|
|
A
picture says a thousand words; infrared thermography
is the only diagnostic technology that lets you
instantly visualize and verify thermal performance.
More Info |
|
|
|
The
primary focus of JLC Inspections is safety within
your home.
More
Info |
|
|
|
If
dogs can sniff out bombs, drugs, people and arson,
then why not mold? The Mold Dog represents the
newest technology and latest trend in the inspection
industry.
More Info |
|
|
|
As
Mold continues to be more prevalent, it is good
to know of a company you can trust, to perform
this very important service.
Click here for Latest Jobs. |
|
|
|
Selecting
a qualified Mold Inspector should be very similar
to selecting a general contractor, plumber,
Click
here for more info. |
|
|
|
As
Mold continues to be more prevalent, it is good
to know of a company you can trust, to perform
this very important service.
More
Info |
|
|
MOLD
INSPECTION SERVICES:
| Mold
Detection Dogs: |
The
Mold Dog represents the newest technology and latest trend
in the inspection industry. For consumers, this is great
news - quicker and more accurate remediation leads to lower
costs.
If
dogs can sniff out bombs, drugs, people and arson,
then why not mold?
In
response to this question, Whitstine immediately put
together a panel of experts to include: Chief forensic chemist
Niles Bashaw of Innovative Applied Science Laboratory, in
Tampa, Florida; Microbiologist and Industrial Hygienist
Michael Williamson of Apollo Environmental Inc. in Gibsonton,
Florida; and for veterinarian and research support, Dr.
Larry Myers of Auburn University, in Auburn, Georgia. After
more than two years of study, this panel of experts concluded
that dogs could, in fact, be trained to sniff out specific
microbial volatile organic compounds associated with over
17 specific species of the most common “toxic”
molds. Later, armed with the support of the experts, Whitstine
began training the first dogs with a few mold odors.Once
it was clear that dogs could find the hidden mold in various
building structures, Whitstine began to fine-tune the dogs’
detection abilities by adding additional odors.
They
Discovered finding hidden mold is not as hard as finding
arson, bombs or drugs. For example, arson-detection dogs
must alert to more than 30 different types of accelerants
and must be able to do so after an arsonist has poured gasoline
in a buildings, the building has burned to the ground, the
firefighters have put thousands of gallons of water on the
fire, and all of the burned items are masking the odor of
the trace amounts of accelerant left. The dog must then
sniff through the ashes and accurately pinpoint the remaining
parts per trillion of gasoline left. Similarly, drug dealers
routinely try to hide their drugs by masking the odor with
items such as coffee or fabric softener, but still the dogs
find it. By way of contrast, mold is not hiding from us;
however, mold is frequently not visible to the human eye.
Our
Mold Dogs are specifically trained to alert (sit) on at
least eighteen different kinds of the most common toxic
molds. If a dog alerts, there is a mold issue which signals
a moisture problem, i.e.: leaky pipe, etc. The mold dogs
have become a very accurate resource and low cost method
to find where mold problems are. To
Read More about our Mold Detection Dogs Click Here
|
|
|
| Thermal
Imaging: |
Thermography
is the use of an infrared imaging and measurement camera to
"see" "measure" and “record” thermal energy emitted
from an object.
Click
here to view examples of Thermal Imaging.
How
does this help us perform inspections?
Thermal, or infrared energy, is light that is not visible
because its wavelength is too long to be detected by the
human eye; it's the part of the electromagnetic spectrum
that we perceive as heat. Unlike visible light, in the infrared
world, everything with a temperature above absolute zero
emits heat. Even very cold objects, like ice cubes, emit
infrared. The higher the object's temperature, the greater
the IR radiation emitted. Infrared allows us to see what
our eyes cannot.
Infrared
thermography cameras produce images of invisible infrared
or "heat" radiation and provide precise non-contact temperature
measurement capabilities. If objects emit infrared energy
at different levels, and we can see the difference in a
camera, then we can find and solve problems much quicker
and at a lesser cost.
What
are some of the uses of Infrared Cameras?
- Building
Structural Analysis
- Building
interior leaks
- Roof
moisture surveys exterior (leaks)
- Roof
moisture surveys interior (leaks)
- Window
leakage (air and water)
- Insulation
voids
- Poor
HVAC Ducting or leakage
- Electrical
wiring compliance
- Faulty
wiring inside walls and ceilings
- Marine
Surveys ( moisture in hulls of boats)
- Predictive
Maintenance
Nearly
everything gets hot before it fails, making infrared cameras
extremely cost-effective, valuable diagnostic tools in many
diverse applications. And as industry strives to improve
manufacturing efficiencies, manage energy, improve product
quality, and enhance worker safety, new applications for
infrared cameras continually emerge.
How
Do Infrared Cameras Work
An infrared camera is a non-contact device that detects
infrared energy (heat) and converts it into an electronic
signal, which is then processed to produce a thermal image
on a video monitor and perform temperature calculations.
Heat sensed by an infrared camera can be very precisely
quantified, or measured, allowing you to not only monitor
thermal performance, but also identify and evaluate the
relative severity of heat-related problems. Recent innovations,
particularly detector technology, the incorporation of built-in
visual imaging, automatic functionality, and infrared software
development, deliver more cost-effective thermal analysis
solutions than ever before.
Why
measure temperature?
Finding a problem with an infrared camera is sometimes not
enough. In fact, an infrared camera image alone without
accurate temperature measurements says very little about
the condition of an electrical connection or worn mechanical
part. Many electrical targets are operating properly at
temperatures that are significantly above ambient. An infrared
image without measurement can be misleading because it may
visually suggest a problem that does not exist.
Infrared
cameras that incorporate temperature measurement allow predictive
maintenance professionals to make well informed judgments
about the operating condition of electrical and mechanical
targets. Temperature measurements can be compared with historical
operating temperatures, or with infrared readings of similar
equipment at the same time, to determine if a significant
temperature rise will compromise component reliability or
plant safety.
Why
Use Infrared?
A picture says a thousand words; infrared thermography is
the only diagnostic technology that lets you instantly visualize
and verify thermal performance. Infrared cameras show you
thermal problems, quantify them with precise non-contact
temperature measurement, and document them automatically
in seconds with a professional easy-to-read report.
Nearly
everything that uses or transmits power gets hot before
it fails. Cost effective power management is critical to
maintaining the reliability of your electrical and mechanical
systems. And today, no one would argue that infrared thermography
is the most effective proven predictive maintenance (PM)
technology available to quickly, accurately and safely locate
problems prior to failure. In June 2001, Maintenance Technology
magazine reported a $4 return on investment in for every
$1 spent on infrared inspection. Finding and fixing a poor
electrical connection before a component fails can save
you the much greater costs associated with manufacturing
downtime, production losses, power outages, fires and catastrophic
failures.
But
using infrared images to find a problem is sometimes not
enough. In fact, an infrared camera image without an accurate
measurement says very little about the condition of an electrical
connection or worn mechanical part. And, an IR survey without
a simple, fast way to report and analyze inspection results
provides no ability to make timely repair decisions or locate
and separate those 'hot spots' that can cause problems from
those associated with equipment operating normally. FLIR's
ThermaCAM infrared cameras not only quickly locate problems,
but coupled with Reporter software, their non-contact precision
temperature measurement and analysis capabilities instantly
deliver the answers you need to understand what repair action
to take, and when.
Whether
you're looking at buildings or hybrid circuits, there's
a ThermaCAM infrared camera right for your application.
With a complete line of infrared cameras, software, accessories,
world-class thermographic training and applications support,
FLIR stands ready to meet your specific infrared needs.
Flexible rental, lease and purchase plans for our line of
infrared cameras are available. FLIR is the one IR company
you can specify and justify with confidence. Make sure that
all the reliability you planned for gets delivered to your
customer.
|
| |
|
| Leak
Inspections: |
Worried
you might have a leak in your in home's plumbing? Now, there's
a way to find out, with no demolition.
Using
the latest non-invasive scientific equipment, JLC Inspections
can detect leaks in your walls, ceilings, floors, plumbing
or pool, without destroying your property. A leak can cost
you money on your water bill and cause mold & structural
damage.
|
| |
|
| Mold
& Allergen Sampling: |
The
collection and analysis of air and surface samples enables
JLC Inspections to indicate the condition of the
condition of the indoor fungal ecology and its relationship
to the indoor air quality.
Non-viable
air samples via air-o-cell spore trap. Non-viable surface
samples via lift tape or swab stick. Non-viable dust samples
collected via 25mm vacuum driven collection cassette.
Next
day "RUSH" results are available.
|
| |
|
| Viable
Sampling: |
Viable
fungal air samples are collected via vacuum driven agar coated
petri dish.
Viable
fungal surface samples are collected via RODAAC direct contact
agar coated petri dish or swab stick applied to agar coated
petri dish.
Viable
bacterial samples are collected via air, water and surface
samples. These samples are helpful in determining the presence
of bacterium such as Legionella.
Viable
samples require an incubation period of approximately 10-14
days for laboratory analysis.
|
| |
|
| Inspection: |
Inspection
procedures are determined during the initial telephone interview
with the customer prior to the actual inspection. Information
is obtained regarding the size & type of structure and
who is living in the home currently, The primary reason
for the inspection is also discussed which may include evidence
of a recent water incident or allergy related symptoms such
as eye & nose irritation, rhinitis, sinusitis, sore
throat, skin rash etc.
Inspection
procedures regarding a prospective homeowner, real estate
professional, lender, insurer, builder or landlord are also
discussed during a telephone interview. The primary reason
for the inspection is also discussed along with any special
concerns the customer may have regarding IAQ & Mold.
Some
examples of the state of the art scientific equipment used
to collect data from the indoor environment as well as the
outside environment are:
- six
channel digital laser particle counter
- infrared
digital imaging camera
- electronic
moisture detection probes
- audio
leak detect devices
- fiber
optic visual observation device.
The
residential service assessment includes detailed recommendations
of how the customer can maintain and/or improve the indoor
environmental hygiene based on the visual observations and/or
sampling data collected during the indoor environmental
investigation.
|
JLC INSPECTION QUALIFICATIONS:
Jack Clausen is the owner and primary inspector for JLC Inspections,
Inc. During the past 30 years, he has gained a very broad knowledge
of the construction industry as it relates to building defects,
environmental concerns such as Mold and Allergens, and is also
one of the countries Certified Thermographers.
Jacks broad list of qualifications include:
Professional
Certifications and Licenses:
Building:
General
Contractors License: California State Contractors Board
B-803849
Certified Building Inspector:American Home Inspectors
Training Institute, LTD #010784
Residential Real Estate Inspector: FREA #0024157
(RREI)
Indoor
Air Quality:
Council
Certified Microbial Consultant: American Indoor Air Quality
Council #0607106
Certified Mold Inspector: Environmental Solutions
Association
Certified Mold Tech Inspector: Mold Tech #0018
Certified Mold Detection Dog Handler: Florida
Canine Academy, Inc William Whitstine (Master Trainer)
Consulting:
Member
of the National Certification Board for the American Indoor Air
Quality Council. This board approves the mold designations for
all mold inspectors
Across the United States.
Science:
Certified
Level 1 Thermographer: Infrared Training Center #26456
Jack is also one of the few building inspectors in the Nation
that holds the prestigious mold certification of a Council
Certified Microbial Consultant ( CMC ). This prestigious
certification is held by less than 400 mold inspectors Nationwide,
requiring a minimum of 8 years of field experience and training.
A CMC is the person all other mold inspectors come to when they
experience something new and need advice. Jack also sits on the
advisory board for the American Indoor Air Quality Council assisting
in the approval process of all A.I.A.Q.C. mold inspectors across
the nation. How
to Pick a mold inspector
As a mold inspector, Jack separates himself from the typical inspector
by also utilizing the unique sense of smell from trained and Certified
Mold Detection Dogs. These dogs are unique in that they
have been trained much like a bomb, drug, or arson dog to locate
the source, in this case Mold!
Jack exercises his knowledge and expertise on a daily basis by
consulting with both commercial establishments and homeowners
regarding proper property maintenance. Beyond the day-to-day business,
Jack has enjoyed personally designing and building all phases
of home construction.
In addition to his vast knowledge of the construction industry,
Jack also brings to the business a strong management background
after having served many years as Manager in charge of Sales,
Marketing and Operations for an Internationally known Corporation.
Customer service and communication skills are his greatest attributes.
In the Real
Estate world, Jack takes particular pride in his ability to assess
and convey non-critical issues that can be easily remedied, as
well as more important issues that require specific action prior
to escrow closing. He strongly believes that quick response and
strong communication are the keys to successful transactions.
CUSTOMER
TESTIMONIALS:
Hi Jack,
Thanks so much for coming out on Friday to do our home inspection.
It was great meeting you and Hershey. We appreciate the summary
you gave us on-sight and look forward to going through the in-depth
report. Thanks for the referrals and we'll be in touch if we need
more contacts.
Take care, Stephanie
Dear Jack,
Thank you
so much for asking! You have been so helpful, I cannot begin to
express my gratitude. Well, I did submit an offer to buy the house
for 329,000, "as is" with the sellers completing the termite work.
I made my decisions based on the information you provided with
the home inspection as well as several other persons in the real
estate business and contracting. Anyway, I have already let "everyone"
know that if they need a home inspector...YOU ARE THE GUY!!!!!
Thank you for going the extra mile, I will always be grateful.
Tarina
Re: Cherrywood,
Irvine
Hi Jack,
Thanks again
for helping us out! We sure appreciate your professionalism and
the way you treat our clients with respect. We ALWAYS get great
feedback from our Buyer's.... You're a classy guy!
Darlene &
Jon
Hi Jack
Hey I totally
appreciate your honesty today.
I think Veronica (my client) was a little uneasy about the whole
place and so was I. You just confirmed our thought.
Look out for me in the next week or so cause I need you again.
Thanks, E.
F. C-21
Dear Jack:
Thanks for
a great job inspecting the new house. You will be on my recommendation
list.
Jonathan S.
(Saybrook)
Jack,
Thanks for
the email of the inspection. I was able to email it on to the
listing broker. She does want a hard copy for her and her client
along with the pictures. I am not sure if she was able to open
all of it on her computer. I will be looking forward to getting
the report from you asap. I am pleased by your thoroughness and
will highly recommend you in the future.
Cheryl
ABOUT
JLC's MOLD DETECTION DOGS
|
|
Hershey
and Trace have been trained to search for microbial odor
and to detect the source. This is a very successful method
for locating hidden microbial damage. Microorganisms grow
frequently in hidden places, e.g., behind wall linings,
in floors, or behind installations. They are often not visible
from the outside. Often, health complaints occur even after
the moisture damage has dried, sometimes even only then.
In these cases, moisture measurements are not suitable to
localize the microorganisms.
Besides
spores and other particles, microorganisms emit gaseous
substances (microbial volatile organic compounds = MVOC).The
MVOCs are still emitted from the contaminated material long
after the microorganism has died.Dogs can be trained to
search for microbial odor and to detect the source. This
is a very successful method for locating hidden microbial
damage.
|
The mold dog,
however, must be correctly trained, led, and interpreted. In some
cases, it is the only applicable method to find spots damaged
by microorganisms. During a building inspection, the dog is accompanied
by a professional dog handler and an experienced consultant. At
places where the dog marks a microbial odor, samples must be taken
for microbial analysis. By this well directed procedure, destruction
of material is unnecessary and additional costs can be avoided.
Amazingly
Sensitive!
- From a
single drop of urine, the sniffing dog learns the marking animal’s
sex, diet, health, emotional state, and even whether it’s
dominant or submissive, friend or foe.
- Tracking
dogs follow a biochemical trail of dead skin cells, sweat, odor
molecules, and gasses.
For dogs, a scent article is like a three-dimensional “odor
image” - much more detailed than a photograph is for a
person.
- Dogs can
track a scent through snow, air, mud, water, and even ash.
The properly trained and certified detection dog is recognized
in court as a “scientific instrument” (US 9th Circuit
Court of Appeals)
- According
to a report prepared by the Institute for Biological Detection
Systems (IBDS) of Auburn University (Auburn, AL), dogs have
the following capabilities:
- Sensitivity:
Documented limits of olfactory detection for the dog range from
tens of parts per billion to 500 parts per trillion.
- Discrimination:
Dogs are extremely good at discriminating a target vapor from
non-target vapors that are also present, even at relatively
high concentrations of non-target odors.
- Odor
Signatures:
When being trained to detect a substance, dogs learn to alert
to one or two of its most abundant vapor compounds.
- Multiple
Odor Discriminations:
Dogs can easily learn as many as ten odor discriminations.
FREQUENTLY ASKED QUESTIONS
ABOUT MOLD DETECTION DOGS
What
kinds of mold will the Mold Dog find?
Mold Dog is specifically trained to alert (sit) on at least eighteen
different kinds of the most common toxic molds. If a dog alerts,
there is a mold issue which signals a moisture problem, i.e.:
leaky pipe, etc.
Do
mold spores have distinctive smells?
Yes. In fact, dogs can smell active or inactive mold spores. It's
the same with arson dogs and lamp oils listed as odorless - human's
can't smell the oil, but dogs are able to smell it.
If
some molds are bad for humans, won't they also be bad for dogs?
No. Dogs have an amazingly acute sense of smell and a unique ability
to purge odors and other contaminants from their olfactory organs.
Consider that the outdoor environment contains thousands of molds,
pollens and other allergens. We know that when dogs go outside,
they are constantly sniffing the ground and anything else they
can get into. Research suggests that dogs are simply not affected
by various particulate matter in the same way that humans are
affected because of their unique purging ability.
Additionally,
thousands of arson dogs in the U.S. and elsewhere are constantly
exposed to significant amounts of toxic fumes and no adverse health
effects have been documented in more than 15 years of their use.
Finally, Mold Dog handlers receive extensive training about when
and how to use dogs in building structures, ie: if visible mold
is present, there is no need to use a dog.
Does
a Mold Dog need ongoing testing and evaluation to essentially
stay “calibrated”?
Yes. Upon completion of the initial training period, the dog is
certified to detect and pinpoint at least eighteen different kinds
of the most common toxic molds. Thereafter, each Mold Dog receives
quarterly testing and annual recertification.
ABOUT
TOXIC MOLD
This is a
comprehensive guide to many aspects of mold and the potentially
fatal dangers that it poses to infants and individuals with weak
immune systems. Toxic molds have been causing serious health conditions
in humans for hundreds of years. These dangerous types of mold
can exist in damp environments in our home or workplace without
us ever knowing it. In the last ten years, there have been many
reports of toxic molds causing serious and even fatal consequences
for infants and sensitized individuals.
Different
species of fungi have probably been present in human suffering
since the dawn of time. In fact, the adverse health effects of
fungal exposure are mentioned in the Book Of Leviticus. However,
it wasn’t until relatively recently that the scientific
community has identified mold and other fungi as a possible cause
of human’s adverse health effects. Today, certain fungi
and mold are known to the scientific and medical world to be responsible
for allergies, hypersensitivity pneumonitis, humidifier fever,
infections, mushroom poisoning, mycotoxicoses, mucous membrane
irritation, and many other ailments. A few examples of fungi/mold
species that can be hazardous to the health of humans include:
- Penicillium
- Aspergillus
- Stachybotrys
- Paecilomyces
- Fusarium
Mycotoxins
Mycotoxins are poisonous substances that are produced by fungi.
They are one reason for the adverse health effects that molds
have on humans. They occur when humans inhale or ingest fungal
spores. Mycotoxins tend to concentrate in fungal spores, and thus
present a potential hazard to those who inhale these airborne
spores. Toxigenic spores can have a significant affect on the
function of the alveolar macrophage and be a health hazard to
those exposed. Dangerous mold species include Stachybotrys atra,
Aspergillus versicolor, and several toxigenic species of Penicillium.
Health
Effects of Toxic Molds
Although mold affects individuals differently and to different
degrees, the following are some of the most common adverse health
effects.
- Respiratory
problems---wheezing, difficulty in breathing
- Nasal and
sinus congestion
- Eyes-burning,
watery, reddened, blurry vision, light sensitivity
- Dry, hacking
cough
- Sore throat
- Nose and
throat irritation
- Shortness
of breath and lung disease
- Chronic
fatigue
- Skin irritation
- Central
nervous system problems (constant headaches, loss of memory,
and mood changes)
- Aches and
pains
- Fever
- Headaches
- Diarrhea
- Immune
suppression
Research
on Toxic Mold
There has been quite a lot of literature detailing specific case
studies of mold contaminating homes and other structures. However,
there has been relatively little work on the specific conditions
and surroundings that allowed this growth. Beginning in the early
‘90s, the Environmental Protection Agency (EPA) began to
study material properties, temperatures, and ecological niches
that allowed fungi and mold to thrive, expand, and then eventually
die. One of the results discovered was that humidity played a
very indirect role to the growth of mold. However, small amounts
of moisture can foster the development of certain mold cultures.
Other types of mold require much greater levels of moisture. The
fairly toxic species, S. atra, needs a lot of moisture and lots
of materials that contain cellulose in order to foster growth.
Recent studies
and cases have revealed greater rates of poisonous fungal species
in poorly maintained offices/homes with water damage or moisture
problems. While only a small number of molds and fungi are considered
toxic and allergenic, species such as Stachybotrys atra (S. atra)
have been directly linked to numerous cases of hemorrhagic lung
disease in infants.
Within the
last two decades, there has been significant recognition on the
part of government agencies, communities, families, and individuals
regarding the dangers associated with damp, moist, and wet indoor
environments. At once time it was thought that bacteria or viruses
were responsible for many of the health problems within buildings.
Today, many home and workplace-related ailments are now being
properly attributed wholly or, in part, to fungi and mold. As
science and medicine continue to expand our knowledge of the effects
of toxic mold, individuals are becoming much more aware of indoor
air quality issues. For example, only relatively recently have
individuals and families had enough education on the effects of
mold to begin making cases for mold contamination.
Mold
Facts
The
ten things you should know about Mold:
- Potential
health effects and symptoms associated with mold exposures
include allergic reactions, asthma, and other respiratory
complaints.
- There
is no practical way to eliminate all mold and mold spores
in the indoor environment; the way to control indoor mold
growth is to control moisture.
- If
mold is a problem in your home or school, you must clean up
the mold and eliminate sources of moisture.
- Fix
the source of the water problem or leak to prevent mold growth.
- Reduce
indoor humidity ( less than 60% ) to decrease mold growth
by: venting bathrooms, dryers, and other moisture-generating
sources to the outside; using air conditioners and de-humidifiers;
increasing ventilation; and using exhaust fans whenever cooking,
dishwashing, and cleaning.
- Clean
and dry any damp or wet building materials and furnishings
within 24-48 hours to prevent mold growth.
- Clean
mold off hard surfaces with water and detergent, and dry completely.
Absorbent materials such as ceiling tiles, that are moldy,
may need to be replaced.
- Prevent
condensation: Reduce the potential for condensation on cold
surfaces (i.e., windows, piping, exterior walls, roof, or
floors) by adding insulation.
- In
areas where there is a perpetual moisture problem, do not
install carpeting (i.e., by drinking fountains, by classroom
sinks, or on concrete floors with leaks or frequent condensation).
- Molds
can be found almost anywhere; they can grow on virtually any
substance, providing moisture is present. There are molds
that can grow on wood, paper, carpet, and foods.
Kids
and MOLD
When
it comes to keeping your home mold-free, a strong offense
is definitely your best defense. To prevent mold, eliminate
moisture from your home and be on the lookout for signs
of possible growth, such as musty smells or watermarks on
walls and ceilings.
Mold is generally not covered by a homeowners insurance
policy. But when it comes to litigation, lawsuits, lawyers,
and your home builder, the issues become complicated, and
extensive thought and research should be given.
Caught early, mold can usually be removed by a thorough
cleaning with a strong soapy substance such as TSP and water.
To prevent mold from re-growing, however, it is essential
that the source of the moisture be eliminated and the affected
area properly dried, cleaned, and if necessary, replaced. |
|
EXAMPLES
OF THERMAL IMAGING
Thermal
Imaging:
The first step in moisture problem remediation is to quickly
and accurately locate and remove all sources of moisture.
Infrared cameras instantly show you what's wet and what's
dry. IR cameras can instantly find the ultimate source with
little or no physical disassembly of the premises and minimal
disturbance of inhabitants.
Infrared
cameras are the inspection assets preferred by building
experts for fast, reliable, accurate building diagnosis
in the entire range of building problems, from post-catastrophe
fire and flood investigations to chronic leaks and moisture
problems.
Infrared
cameras instantly capture and record high-resolution thermographic
images on-board for subsequent downloading to a PC to give
the client a clear view of the problem areas.
|
|
Infrared
Detection for the exterior
|

Moisture
in building materials can destroy structural integrity
and nurture mold.
A
Leaking Bedroom Ceiling
|
|
|
|
|
The
thermogram (left) clearly shows a leaking bedroom ceiling
(visible, right). The leak was assumed by the owner to originate
in an upstairs marble-paneled bathroom in the $3 million
home. The estimated cost to rip out and replace the marble
to access the plumbing was estimated at $80,000! Further
IR investigation absolved the bathroom and traced the source
of the leak to a clogged weep hole under the threshold of
a door leading to an upstairs porch.
|
|
Roof
Surveys
Roof surveys will never be the same! Infrared cameras instantly
show you what's wet and what's dry. Water leakage is the
number one factor that leads to damaged insulation and substrate,
corrosion and weakening of metal decks and building structure,
even structural collapse and the growth of mold. Infrared
cameras can instantly find the ultimate source with little
or no physical disassembly of the premises and minimal disturbance
of inhabitants.
Deteriorated
roof
|
|
|
|
In
this infrared image, the deteriorated areas of the roof
are clearly shown at the time of inspection
|
|
|
|
|
|
|
Interior
infrared survey conducted during daytime hours reveals central
area saturated with
moisture and in need of immediate repair.
|
|
|
|
|
Double
pane window versus single pane windows.
|
|
Communities
that We Serve:
*
Aliso Viejo 92653, 92656, 92698
* Anaheim 92801, 92802, 92803, 92804, 92805,
92806, 92807, 92808, 92809, 92812,
* Anaheim Hills 92807, 92808, 92809, 92817
* Atwood
* Brea 92821, 92822, 9282392814, 92815, 92816,
92817, 92825, 92850, 92899
* Barber City
* Brea Chem
* Browning
* Buena Park 90620, 90621, 90622, 90623, 90624
* Balboa
* Balboa Island
* Carlton
* Cliff Haven
* Capistrano Beach
* Canyon Acres
* Cerro Villa Heights
* Collonia Manzanillo
* Como
* Corona Del Mar
* Costa Mesa 92626, 92627, 92628
* Coto De Caza 92679
* Cowan Heights
* Crystal Cove
* Cypress 90630
* Dana Point 92624, 92629
* Des Moines
* Dove Canyon 92679
* Dyer
* East Irvine
* East Tustin
* El Toro
* Emerald Bay
* Foothill Ranch
* Fountain Valley 92708, 92728
* Frances
* Fullerton 92831, 92832, 92833, 92834, 92835,
92836, 92837, 92838
* Fuller Park
* Galivan
|
* Garden Grove 92840, 92841, 92842, 92843, 92844,
92845, 92846
* Huntington Beach 92605, 92615, 92646, 92647,
92648, 92649
* Irvine 92602, 92603, 92604, 92606, 92612,
92614, 92616, 92618, 92619
* Kathryn
* La Habra 90631, 90632, 90633
* La Jolla
* La Palma 90623, 92620, 92623, 92650, 92697,
92709, 92710
* Ladera Ranch 92694
* Laguna Beach 92607, 92637, 92651, 92652, 92653,
92654, 92656, 92677, 92698
* Laguna Hills 92637, 92653, 92654, 92656
* Laguna Niguel 92607, 92677
* Laguna Woods 92653, 92654
* Lake Forest 92609, 92630
* Leisure World
* Lemon Heights
* Liberty Park
* Los Alamitos 90720, 90721
* Las Flores 92688
* Marlboro
* Midway City
* Mission Viejo 92675, 92690, 92691, 92692,
92694
* Modjeska
* Mopherson
* Newport Beach 92657, 92658, 92659, 92660,
92661, 92662, 92663
* Newport Coast
* Ocean View
* Olinda
* Olive
* Orange 92856, 92857, 92859, 92861, 92862,
92863, 92864, 92865, 92866, 92867,
* Panorama Heights
* Placentia 92870, 92871, 92868, 92869
* Portola Hills
|
* Rancho Santa Margarita 92688
* Robinson Ranch
* Red Hill
* San Onofre
* San Clemente 92672, 92673, 92674
* San Juan Hot Springs
* San Juan Capistrano 92675, 92690, 92691, 92692,
92693, 92694
* Santa Ana 92701, 92702, 92703, 92704, 92705,
92706, 92707, 92708, 92711,
* Santa Ana Gardens
* Santa Ana Heights
* South Anaheim
* South Laguna
* South Santa Ana
* Silverado Canyon
* Seal Beach 90740, 92712, 92725, 92728, 92735,
92799
* Smeltzer
* Stanton 90680
* Surfside Beach
* Sunset Beach
* Sunny Hills
* Top of the World
* Three Arch Bay
* Trabuco Canyon
* Trabuco Highlands
* Tustin 92780, 92781, 92782
* Tustin Foothills
* Villa Park 92861, 92867
* Westminister 92683, 92684, 92685
* West Anaheim
* Yorba Linda 92885, 92886, 92887 |
|
|
 |
| |
|
ALL
ABOUT MOLD
Molds
include all species of microscopic fungi that grow
in the form of multicellular filaments, called hyphae.
In contrast, microscopic fungi that grow as single
cells are called yeasts. A connected network of these
tubular branching hyphae has multiple, genetically
identical nuclei and is considered a single organism,
referred to as a colony or in more technical terms
a mycelium.
Molds
do not form a specific taxonomic or phylogenetic grouping,
but can be found in the divisions Zygomycota,
Deuteromycota and Ascomycota. Although
some molds cause disease or food spoilage, others are
useful for their role in biodegradation or in the production
of various foods, beverages, antibiotics and enzymes.
Biology
There
are hundreds of known species of molds, which include
opportunistic pathogens, saprotrophs, aquatic species
and thermophiles.Like all fungi, molds derive energy
not through photosynthesis but from the organic matter,
inside of which they live. Typically, molds secrete
hydrolytic enzymes, mainly from the hyphal tips. These
enzymes degrade complex biopolymers such as starch,
cellulose and lignin into simpler substances which can
be absorbed by the hyphae. In this way, molds play a
major role in causing decomposition of organic material,
enabling the recycling of nutrients throughout ecosystems.
Many molds also secrete mycotoxins which, together with
hydrolytic enzymes, inhibit the growth of competing
microorganisms.
Molds
reproduce through small spores, which may contain a
single nucleus or be multinucleate. Mold spores can
be asexual (the products of mitosis) or sexual (the
products of meiosis); many species can produce both
types. Some can remain airborne indefinitely, and many
are able to survive extremes of temperature and pressure.
Although
molds grow on dead organic matter everywhere in nature,
their presence is only visible to the unaided eye when
mold colonies grow. A mold colony does not comprise
discrete organisms, but an interconnected network of
hyphae called a mycelium. Nutrients and in some cases
organelles may be transported throughout the mycelium.
In artificial environments like buildings, humidity
and temperature are often stable enough to foster the
growth of mold colonies, commonly seen as a downy or
furry coating growing on food or other surfaces.
Some
molds can begin growing at temperatures as low as 2°C.
When conditions do not enable growth, molds may remain
alive in a dormant state, within a large range of temperatures
before they die. The many different mold species vary
enormously in their tolerance to temperature and humidity
extremes. Certain molds can survive harsh conditions
such as the snow-covered soils of Antarctica, refrigeration,
highly acidic solvents, and even petroleum products
such as jet fuel.
Xerophilic
molds use the humidity in the air as their only water
source; other molds need more moisture.
Common
molds
- Acremonium
- Aspergillus
- Cladosporium
- Fusarium
- Mucor
- Penicillium
- Rhizopus
- Stachybotrys
- Trichoderma
Uses
|
Bread
mold is one of the most common types of mold, and
can cover a loaf of bread in less than three days.

Mold
covering a decaying peach over a period of six days.
The frames were taken approximately 12 hours apart.
There are 11 frames of changes.
Stilton
cheese contains edible mold.
|
Food production
Cultured
molds are used in the production of foods, including:
- cheese
(Penicillium spp.)
- tempeh
(Rhizopus oligosporus)
- Quorn
(Fusarium venenatum)
- sausages
- soy
sauce
The
koji molds are a group of Aspergillus species, notably Aspergillus
oryzae, that have been cultured in eastern Asia for many centuries.
They are used to ferment a soybean and wheat mixture to make
soybean paste and soy sauce. They are also used to break down
the starch in rice (saccharification) in the production of
sake and other distilled spirits.
Drug
creation
Alexander
Fleming's famous discovery of the antibiotic penicillin involved
the mold Penicillium chrysogenum.
Several
cholesterol-lowering drugs (such as Lovastatin, from Aspergillus
terreus) are derived from molds.
The
immunosuppressant drug cyclosporine, used to suppress the
rejection of transplanted organs, is derived from the mold
Tolypocladium inflatum.
Other
uses
Other
molds are cultivated for their ability to produce useful substances.
Aspergillus niger is used in the production of citric acid,
gluconic acid and many other compounds and enzymes. The mold
Aspergillus nidulans is an important model organism. Ashbya
gossypii is used in industrial production of riboflavin and
is further studied as a model organism.
Health
effects
Molds
are ubiquitous in nature, and mold spores are a common component
of household and workplace dust. However, when mold spores
are present in large quantities, they can present a health
hazard to humans, potentially causing allergic reactions and
respiratory problems.
Some
molds also produce mycotoxins that can pose serious health
risks to humans and animals. Exposure to high levels of mycotoxins
can lead to neurological problems and in some cases death.
Prolonged exposure, e.g. daily workplace exposure, can be
particularly harmful. The term toxic mold refers to molds
that produce mycotoxins, such as Stachybotrys chartarum, and
not to all molds in general.
Growth
in buildings and homes
Mold
growth in buildings can lead to a variety of health issues.
Various practices can be followed to mitigate mold issues
in buildings, the most important of which is to reduce moisture
levels that can facilitate mold growth. Removal of affected
materials after the source of moisture has been reduced and/or
eliminated may be necessary for remediation.
Mold
growth, assessment, and remediation
Mold
assessment and Mold remediation are
techniques used in occupational health: mold assessment is the
process of identifying the location and extent of the mold hazard
in a structure, and mold remediation is the process of removal
and/or cleanup of mold from an indoor environment.
It
has been estimated that 40 percent of United States homes have
some form of mold problem.
Health
effects
Molds
are ubiquitous in nature, and mold spores are a common component
of household and workplace dust. However, when mold spores are
present in large quantities, they can present a health hazard
to humans, potentially causing allergic reactions and respiratory
problems.
Some
molds also produce mycotoxins that can pose serious health risks
to humans and animals. Exposure to high levels of mycotoxins
can lead to neurological problems and in some cases death. Prolonged
exposure, e.g. daily workplace exposure, can be particularly
harmful. The term toxic mold refers to molds that produce mycotoxins,
such as Stachybotrys chartarum, and not to all molds in general.
Causes
/ Growing conditions
Molds
and fungi are found everywhere inside and outside, and can grow
on almost any substance when moisture is present. Molds when
they reproduce make spores, which can be carried by air currents.
When these spores land on a moist surface that is suitable for
life, they begin to grow. Molds are essential to the natural
breakdown of organic materials in the environment. Mold is normally
found indoors at levels that do not affect most healthy individuals.
When these levels become abnormally high as determined by indoor
air quality testing or a mold inspection, remediation is recommended
to be carried out by a professional remediation company.[citation
needed]
Because
common building materials are capable of sustaining mold growth,
and mold spores are ubiquitous, mold growth in an indoor environment
is typically related to an indoor water or moisture problem.
Mold growth may also be caused by incomplete drying of flooring
materials such as concrete.[2] Leaky roofs, building maintenance
problems, or indoor plumbing problems can lead to mold growth
inside homes, schools, or office buildings. Another common source
of mold growth is flooding.
For
significant mold growth to occur, there must be a source of
water (which could be invisible humidity), a source of food,
and a substrate capable of sustaining growth. Common building
materials, such as plywood, drywall, furring strips, carpets,
and carpet padding are food for molds. In carpet, invisible
dust and cellulose are the food sources (see also dust mites).
After a single incident of water damage occurs in a building,
molds grow inside walls and then become dormant until a subsequent
incident of high humidity; this illustrates how mold can appear
to be a sudden problem, long after a previous flood or water
incident that did not produce a mold-related problem. The right
conditions re-activate mold. Studies also show that mycotoxin
levels are perceptibly higher in buildings that have once had
a water incident (source CMHC).
Both
our indoor and outdoor environment have mold spores present.
There is no such thing as a mold free environment in the Earth's
biosphere.
Spores
need three things to grow into mold:
-
Nutrients:
Food for spores in an indoor environment is organic matter,
often cellulose.
-
Moisture:
Moisture is required to begin the decaying process caused
by the mold.
-
Time:
Mold growth begins between 24 hours and 10 days from the
provision of the growing conditions. There is no known way
to date mold.
Mold
colonies can grow inside building structures. The main problem
with the presence of mold in buildings is the inhalation of
mycotoxins. Molds may produce an identifiable smell. Growth
is fostered by moisture. After a flood or major leak, mycotoxin
levels are higher in the building even after it has dried out
(source: CMHC).
Food
sources for molds in buildings include cellulose-based materials,
such as wood, cardboard, and the paper facing on both sides
of drywall, and all other kinds of organic matter, such as soap,
dust and fabrics. Carpet contains dust made of organic matter
such as skin cells. If a house has mold, the moisture may be
from the basement or crawl space, a leaking roof, or a leak
in plumbing pipes behind the walls. Insufficient ventilation
can further enable moisture build-up. The more people in a space,
the more humidity builds up. This is from normal breathing and
perspiring. Visible mold colonies may form where ventilation
is poorest, and on perimeter walls, because they are coolest,
thus closest to the dew point.
If
there are mold problems in a house only during certain times
of the year, then it is probably either too air-tight, or too
drafty. Mold problems occur in airtight homes more frequently
in the warmer months (when humidity reaches high levels inside
the house, and moisture is trapped), and occur in drafty homes
more frequently in the colder months (when warm air escapes
from the living area into unconditioned space, and condenses).
If a house is artificially humidified during the winter, this
can create conditions favorable to mold. Moving air may prevent
mold from growing since it has the same desiccating effect as
lowering humidity. Keeping indoor air temperature higher than
74 °F (23.3 °C) also has an inhibiting effect on mold
growth.
Because
common building materials are capable of sustaining mold growth,
and mold spores are ubiquitous, mold growth in an indoor environment
is typically related to an indoor water or moisture problem.
Leaky roofs, building maintenance problems, or indoor plumbing
problems can lead to mold growth inside homes, schools, or office
buildings. Another common cause of mold growth is flooding.
Removing
one of the three requirements for mold reduces or eliminates
the new growth of mold. These three requirements are 1) Moisture,
2) Food source for the mold spores (dust, dander, etc), and
3) Warmth (mold generally does not grow in cold environments).
HVAC
systems can create all three requirements for significant mold
growth. The A/C system creates a difference in temperature that
allows/causes condensation to occur. The high rate of dusty
air movement through an HVAC system may create ample sources
of food sources for the mold. And finally, since the A/C system
is not always running - the ability for warm conditions to exist
on a regular basis allows for the final component for active
mold growth.
Because
the HVAC system circulates air contaminated with mold spores
and sometimes toxins - it is vital to prevent any three of the
environments required for mold growth. A) Highly effective return
air filtration systems are available that eliminate up to 99.9%
of dust accumulation (as compared to 5% elimination by typical
HVAC air filters). These newer filtration systems usually require
modification to existing HVAC systems to allow for the larger
size of electrostatic 99.9% filters. However, thorough cleaning
of the HVAC system is required before usage of high efficiency
filtration systems will help. Once mold is established - the
mold growth and dust accumulation must be removed. B) Insulation
of supply air ducts helps to reduce or eliminate the condensation
that ultimately creates the moisture required for mold growth.
This insulation should be place externally on the air ducts,
because internal insulation provides a dust capture and breeding
ground for mold.
Assessment
The
first step in an assessment is to determine if mold is present.
This is done by visually examining the premises. If mold is
growing and visible this helps determine the level of remediation
that is necessary. If mold is actively growing and is visibly
confirmed the need for sampling for specific species of mold
is unnecessary.
Another
assessment method is to determine if the premise smells of mold,
often described as an earthy or musty odor. However, not all
molds produce the telltale mold odors.
These
methods are considered to be non-intrusive and only visible
and odor causing molds will be found. Sometimes more intrusive
methods are needed to assess the level of mold contamination.
This would include moving furniture, lifting and/or removing
carpets, checking behind wallpaper or paneling, checking in
ventilation duct work, opening and exposing wall cavities, etc.
Careful
detailed visual inspection and recognition of moldy odors should
be used to find problems needing correction. Efforts should
focus on areas where there are signs of liquid moisture or water
vapor (humidity) or where moisture problems are suspected. The
investigation goals should be to locate indoor mold growth to
determine how to correct the moisture problem and remove contamination
safely and effectively.
The
basic goals of any mold investigation are always twofold: 1)
find the locations of mold growth, and 2) determine the sources
of the moisture. If these can be answered by simpler or more
cost-effective methods, mold testing is probably not a wise
use of resources.
Many
organizations exist that provide certification for mold investigation/assessments.
However, only the American Indoor Air Quality Council provides
accredited certifications. In the state of Texas there is legislation
dictating who can and cannot perform investigation.[citation
need
Sampling
In
general the EPA does not recommend sampling unless an occupant
of the space is symptomatic. When sampling is necessary it should
be performed by a trained professional who has specific experience
in designing mold-sampling protocols, sampling methods, and
the interpretation of findings. Sampling should only be conducted
to answer a pertinent question: examples "what is the spore
concentration in the air"," or is a particular species
of fungi present in the building." The additional question
should be asked before sampling "what action can or should
a person take upon obtaining data."
The
sampling and analysis should follow the recommendations of Occupational
Safety and Health Administration (OSHA), National Institute
for Occupational Safety and Health (NIOSH), Environmental Protection
Agency (EPA), and the American Industrial Hygiene Association
(AIHA). Most importantly, when a sample is taken the proper
chain of custody should be adhered to. The AIHA offers lists
of accredited laboratories that submit to required quarterly
proficiency testing.
Three
types of air sampling include but are not limited to:
- Air
sampling: the most common form of sampling to asses
the level of mold. Sampling of the inside and outdoor air
is conducted and the results to the level of mold spores
inside the premises and outside are compared. Often, air
sampling will provide positive identification of the existence
of non-visible mold.
- Surface
samples: sampling the amount of mold spores deposited
on indoor surfaces (swab, tape, and dust samples)
- Bulk
samples: the removal of materials from the contaminated
area to identify and determine the concentration of mold
in the sample.
When
sampling is conducted, all three types is recommended by the
AIHA, as each sample method alone has specific limitations.
For example, air samples will not provide proof a hidden source
of mold. Nor would a swab sample provide the level of contamination
in the air.
Though
it may not be recommended, air sampling following mold remediation
is usually the best way to ascertain efficacy of remediation,
when conduct by a qualified third party.
Remediation
The
first step in solving an indoor mold problem is stopping the
source of moisture. Next is to remove the mold growth. Common
remedies for small occurrences of mold include:
- Sunlight
- Ventilation
- Non-porous
building materials
- Household
cleansers
Significant
mold growth may require professional mold remediation and removal
of affected building materials. A conservative strategy is to
discard any building materials saturated by the water intrusion
or having visible mold growth.
There
are many ways to prevent mold growth; see ventilation issues
in houses.
In
extreme cases of mold growth in buildings, it may be easier
to condemn the building rather than clean the mold to safe levels.
Certain
contractors are capable of repairing mold damage - usually by
removing the affected areas and eliminating the cause of the
excess moisture.
There
are also cleaning companies that specialize in fabric restoration
- a process by which mold and mold spores are removed from clothing
to eliminate odor and prevent further mold growth and damage
to the garments.
Improper
methods for cleaning mold include exposure to high heat, dry
air, sunlight (particularly UV light), ozone, and application
of fungicides. These methods may render the mold non-viable,
however, the mold and its by-products can still elicit health
effects. As noted in following sections, the only proper way
to clean mold is to use detergent solutions that physically
remove mold. Many commercially available detergents marketed
for mold clean-up also include an anti-fungal agent. The most
effective way at this point is formal Mold Remediation.
The
goal of remediation is to remove or clean contaminated materials
in a way that prevents the emission of fungi and dust contaminated
with fungi from leaving a work area and entering an occupied
or non-abatement area, while protecting the health of workers
performing the abatement.
Cleanup
and removal methods
The
purpose of the clean-up process is to eliminate the mold and
fungal growth and to remove contaminated materials. As a general
rule, simply killing the mold with a biocide is not enough.
The mold must be removed since the chemicals and proteins, which
cause a reaction in humans, are still present even in dead mold.
Vacuum
Wet
vacuum cleaners are designed to remove water from floors, carpets
and other hard surfaces where water has accumulated. Wet vacuuming
should only be used on wet materials, as spores may be exhausted
into the indoor environment if insufficient liquid is present.
After use this equipment must be thoroughly cleaned and dried
as spores can adhere to the inner surfaces of the tank, hoses,
and other attachments.
Damp
wipe
Damp
wipe is the removal of mold from non-porous surfaces by wiping
or scrubbing with water and a detergent. Care must be exercised
to make sure the material is allowed to quickly dry to discourage
any further mold growth. With surfaces such as metal, glass,
hardwood, plastics, and concrete, you should scrape off as much
of the mold as possible. Then, scrub the surface with a moldicide
or fungicide cleaner.
HEPA
vacuum
High
Efficiency Particulate Air filtered vacuum cleaners are used
in the final cleanup of remediation areas after materials have
been thoroughly dried and all contaminated materials have been
removed. HEPA vacuum cleaners are recommended for the cleanup
of the outside areas surrounding the remediation area. During
this process the workers wear proper personal protective equipment
(PPE) to prevent exposure to mold and other contaminants. The
collected debris and dust should be stored in impervious bags
or containers in a manner to prevent any release of debris.
Disposal
of debris and damaged materials
Building
materials and furnishings contaminated with mold should be placed
into impervious bags or closed containers while in the remediation
area. These materials can usually be discarded as regular construction
waste.
Equipment
Several
types of equipment may be used in the remediation process and
may include:
- Moisture
meter: a tool that measures the moisture level
in building materials. It can also be used to measure the
progress of the drying of damaged materials. Pin moisture
meters have a small probe that is inserted into the material.
Pinless moisture meters usually have a flat sensing area
that is pressed directly against the material's surface.Moisture
meters can be used on carpet, wallboard, woods, brick, and
other masonry.
- Humidity
gauge: measures the amount of humidity in the indoor
environment. Often gauges are paired with a thermometer
to measure the temperature.
- Borescope:
a hand-held tool that allows the user to see potential mold
problems inside walls, ceilings, crawl spaces, and other
tight spaces. It consists of a camera on the end of a flexible
“snake”. No major drilling or cutting of dry
wall is required.
- Digital
camera: used to document findings during assessment.
- Personal
protective equipment (PPE): includes respirators,
gloves, impervious suit, and eye protection. These items
can be used during the assessment and remediation processes.
- Thermographic
camera : Infrared thermal imaging cameras
are often used (and effective) in addition to moisture meters
to double check moisture meter findings, and look at the
broader picture. They help mainly in identifying auxiliary
points of moisture intrusion.
- Dehumidifier :
If you have high humidity in your home from things like
aquariums or house plants, a dehumidifier can help bring
down the level of moisture in the air. This in turn will
reduce the chances that mold can build up within these areas
of your home.
Protection
levels
During
the remediation process, the level of contamination dictates
the level of protection for the remediation workers. The levels
of contamination are described as Levels I, II, and III. Each
has specific requirements for worker safety. The levels are
as follows:
Level
I
Small
Isolated Areas (10 sq. ft or less) for example, ceiling tiles,
small areas on walls.
- Remediation
can be conducted by the regular building staff as long as
they are trained on proper clean-up methods, personal protection,
and potential hazards. This training can be performed as
part of a program to comply with the requirements of OSHA
Hazard Communication Standard ( 29 CFR 1910.1200).
- Respiratory
protection (for example, N-95 disposable respirator) is
recommended. Respirators must be used in accordance with
the OSHA respiratory protection standard (29 CFR 1910.134).
Gloves and eye protection should also be worn.
- The
work area should be unoccupied. Removing people from spaces
adjacent to the work area is not necessary, but is recommended
for infants (less than 12 months old), persons recovering
from recent surgery, immune-suppressed, or people with respiratory
diseases.
- Containment
of the work area is not necessary. However, misting and
dust suppression is recommended.
- Contaminated
materials that cannot be cleaned should be removed from
the building in sealed impermeable plastic bags and disposed
of as ordinary waste.
- The
work area/areas used by workers for access/egress should
be cleaned with a damp cloth or mop and a detergent.
- All
areas should be left dry and visibly free of from contamination
and debris.
Level
II
Mid-sized
Isolated Areas (10-30 sq ft) – for example, individual
wallboard panels.
- Remediation
can be conducted by the regular building staff as long as
they are trained as for Level I. Respiratory protection,
occupation of the work and adjacent areas, and handling
of contaminated materials are the same as for Level I.
- Surfaces
in the work area that could become contaminated should be
covered with sheet(s) of plastic that are secured in place.
This should be done prior to any remediation process to
prevent further contamination.
- Dust
suppression methods, such as misting (not soaking) surface
prior to remediation, are recommended.
- The
work area/areas used by workers for access/egress should
be HEPA vacuumed and cleaned with a damp cloth or mop and
a detergent.
- As
with Level I, all areas should be left dry and visibly free
from contamination and debris.
Level
III
Large
Isolated Areas (30-100 sq ft) – e.g., several wallboard
panels
- Industrial
hygienists or other environmental health and safety professionals
with experience performing microbial investigations and/or
mold remediation should be consulted prior to remediation
activities to provide oversight for the project.
- It
is recommended that personnel be trained in the handling
of hazardous materials and equipped with respiratory protection
(N-95 disposable respirator). Respirators must be used in
accordance with OSHA respiratory protection standard (29
CFR 1910.134) Gloves and eye protection should also be worn.
- Surfaces
in the work area and areas directly adjacent that could
become contaminated should be covered with a secured plastics
sheet(s) before remediation to contain dust/debris and prevent
further contamination.
- Seal
ventilation ducts/grills in the work area and areas directly
adjacent with plastic sheeting.
- The
work area and areas directly adjacent should be unoccupied.
Removing people from spaces adjacent to the work area is
not necessary, but is recommended for infants (less than
12 month old), persons recovering from recent surgery, immune-suppressed
or people with respiratory diseases.
- Dust
suppression methods, such as misting (not soakings) surface
prior to remediation, are recommended.
- Contaminated
materials that cannot be cleaned should be removed from
the building in sealed impermeable plastic bags and disposed
of as ordinary waste.
- The
work area/areas used by workers for access/egress should
be HEPA vacuumed and cleaned with a damp cloth or mop and
a detergent.
- All
areas should be left dry and visibly free from contamination
and debris.
Level
IV
Extensive
Contamination (greater than 100 contiguous sq. ft in an area).
- Personnel
trained in handling of hazardous materials and equipped
with:
- Full
face respirators with HEPA cartridges
- Disposable
protective clothing covering the entire body including
the head, shoes and hands
- Containment
of the affected area:
- Complete
isolation of the work area from occupied spaces using
plastic sheeting sealed with duct tape ( including ventilation
duct/grills, fixtures, and other openings
- The
use of an exhaust fan with a HEPA filter to generate negative
pressurization, a decontamination room, and airlocks
- Contaminated
materials that cannot be cleaned should be removed from
the building in sealed impermeable plastic bags and disposed
of as ordinary waste.
- The
contained area and decontamination room should be HEPA vacuumed
and cleaned with a damp cloth or mopped with a detergent
solution and be visibly clean prior to the removal of any
isolation barrier.
In
conclusion, after the moisture source has been eliminated and
the mold growth removed, the premises should be revisited and
the reevaluated to ensure the mold growth and the remediation
process was successful. The premises should be free of any moldy
smells or visible growth.
|
ABOUT ORANGE
COUNTY: |
 |
Orange County is a county in Southern California,
United States. Its county seat is Santa Ana. According
to the 2000 Census, its population was 2,846,289,
making it the second most populous county in the
state of California, and the fifth most populous
in the United States. The state of California estimates
its population as of 2007 to be 3,098,121 people,
dropping its rank to third, behind San Diego County.
Thirty-four incorporated cities are located in Orange
County; the newest is Aliso Viejo.
Unlike many other large centers of population in
the United States, Orange County uses its county
name as its source of identification whereas other
places in the country are identified by the large
city that is closest to them. This is because there
is no defined center to Orange County like there
is in other areas which have one distinct large
city. Five Orange County cities have populations
exceeding 170,000 while no cities in the county
have populations surpassing 360,000. Seven of these
cities are among the 200 largest cities in the United
States.
Orange County is also famous as a tourist destination,
as the county is home to such attractions as Disneyland
and Knott's Berry Farm, as well as sandy beaches
for swimming and surfing, yacht harbors for sailing
and pleasure boating, and extensive area devoted
to parks and open space for golf, tennis, hiking,
kayaking, cycling, skateboarding, and other outdoor
recreation. It is at the center of Southern California's
Tech Coast, with Irvine being the primary business
hub.
The average price of a home in Orange County is
$541,000. Orange County is the home of a vast number
of major industries and service organizations. As
an integral part of the second largest market in
America, this highly diversified region has become
a Mecca for talented individuals in virtually every
field imaginable. Indeed the colorful pageant of
human history continues to unfold here; for perhaps
in no other place on earth is there an environment
more conducive to innovative thinking, creativity
and growth than this exciting, sun bathed valley
stretching between the mountains and the sea in
Orange County.
Orange County was Created March 11 1889, from part
of Los Angeles County, and, according to tradition,
so named because of the flourishing orange culture.
Orange, however, was and is a commonplace name in
the United States, used originally in honor of the
Prince of Orange, son-in-law of King George II of
England.
|
|
Incorporated:
March 11, 1889
Legislative Districts:
* Congressional: 38th-40th, 42nd & 43
* California Senate: 31st-33rd, 35th & 37
* California Assembly: 58th, 64th, 67th, 69th,
72nd & 74
County Seat: Santa Ana
County Information:
Robert E. Thomas Hall of Administration
10 Civic Center Plaza, 3rd Floor, Santa Ana
92701
Telephone: (714)834-2345 Fax: (714)834-3098
County Government Website: http://www.oc.ca.gov |
CITIES OF ORANGE COUNTY CALIFORNIA:
City
of Aliso Viejo,
92653, 92656, 92698
City of
Anaheim, 92801, 92802, 92803, 92804, 92805,
92806, 92807, 92808, 92809, 92812, 92814,
92815, 92816, 92817, 92825, 92850, 92899
City of
Brea, 92821, 92822, 92823
City of
Buena Park, 90620, 90621, 90622, 90623,
90624
City
of Costa Mesa, 92626, 92627, 92628
City
of Cypress, 90630
City of
Dana Point, 92624, 92629
City
of Fountain Valley, 92708, 92728
City
of Fullerton, 92831, 92832, 92833, 92834,
92835, 92836, 92837, 92838
City
of Garden Grove, 92840, 92841, 92842,
92843, 92844, 92845, 92846
City
of Huntington Beach, 92605, 92615, 92646,
92647, 92648, 92649
City
of Irvine, 92602, 92603, 92604, 92606,
92612, 92614, 92616, 92618, 92619, 92620,
92623, 92650, 92697, 92709, 92710
City
of La Habra, 90631, 90632, 90633
City
of La Palma, 90623
City
of Laguna Beach, 92607, 92637, 92651,
92652, 92653, 92654, 92656, 92677, 92698
City
of Laguna Hills, 92637, 92653, 92654,
92656
City
of Laguna Niguel, 92607,
92677
|
City
of Laguna Woods,
92653, 92654
City
of Lake Forest, 92609, 92630, 92610
City
of Los Alamitos, 90720, 90721
City
of Mission Viejo, 92675, 92690, 92691,
92692, 92694
City
of Newport Beach, 92657, 92658, 92659,
92660, 92661, 92662, 92663
City
of Orange, 92856, 92857, 92859, 92861,
92862, 92863, 92864, 92865, 92866, 92867,
92868, 92869
City of
Placentia, 92870, 92871
City of
Rancho Santa Margarita, 92688, 92679
City of
San Clemente, 92672, 92673, 92674
City
of San Juan Capistrano, 92675, 92690,
92691, 92692, 92693, 92694
City
of Santa Ana, 92701, 92702, 92703, 92704,
92705, 92706, 92707, 92708, 92711, 92712,
92725, 92728, 92735, 92799
City
of Seal Beach, 90740
City
of Stanton, 90680
City of
Tustin, 92780, 92781, 92782
City of
Villa Park, 92861, 92867
City
of Westminster, 92683, 92684, 92685
City
of Yorba Linda, 92885, 92886, 92887
|
Noteworthy
communities Some of the communities that exist
within city limits are listed below:
* Anaheim Hills, Anaheim * Balboa Island,
Newport Beach * Corona del Mar, Newport Beach
* Crystal Cove / Pelican Hill, Newport Beach
* Capistrano Beach, Dana Point * El Modena,
Orange * French Park, Santa Ana * Floral Park,
Santa Ana * Foothill Ranch, Lake Forest *
Monarch Beach, Dana Point * Nellie Gail, Laguna
Hills * Northwood, Irvine * Woodbridge, Irvine
* Newport Coast, Newport Beach * Olive, Orange
* Portola Hills, Lake Forest * San Joaquin
Hills, Laguna Niguel * San Joaquin Hills,
Newport Beach * Santa Ana Heights, Newport
Beach * Tustin Ranch, Tustin * Talega, San
Clemente * West Garden Grove, Garden Grove
* Yorba Hills, Yorba Linda * Mesa Verde, Costa
Mesa
Unincorporated communities These communities
are outside of the city limits in unincorporated
county territory: * Coto de Caza * El
Modena * Ladera Ranch * Las Flores * Midway
City * Orange Park Acres * Rossmoor * Silverado
Canyon * Sunset Beach * Surfside * Trabuco
Canyon * Tustin Foothills
Adjacent counties to Orange County Are:
* Los Angeles County, California - north,
west * San Bernardino County, California -
northeast * Riverside County, California -
east * San Diego County, California - southeast
|
ABOUT SAN DIEGO
COUNTY:
San Diego is a coastal Southern California city
located in the southwestern corner of the continental
United States. As of 2006, the city has an estimated
population of 1,256,951. It is the second largest
city in California and the eighth largest city
in the United States. It is the county seat of
San Diego County.GR6 and is the economic center
of the San Diego–Carlsbad–San Marcos
metropolitan area, the 17th-largest metro area
in the U.S. with a population of 2.9 million as
of 2006, and the 21st largest Metropolitan area
in the Americas when including Tijuana.
San
Diego County lies just north of the Mexican border—sharing
a border with Tijuana—and lies south of
Orange County. It is home to miles of beaches,
a mild Mediterranean climate and 16 military facilities
hosting the United States Navy, the United States
Coast Guard and the United States Marine Corps.
The
University of California, San Diego (UCSD) and
the affiliated UCSD Medical Center combined with
nearby research institutes in the Torrey Pines
area of La Jolla make the area influential in
biotechnology research. San Diego's economy is
largely composed of agriculture, biotechnology/biosciences,
computer sciences, electronics manufacturing,
defense-related manufacturing, financial and business
services, ship-repair and construction, software
development, telecommunications, and tourism.
The city of San Diego it self has deep canyons
separating its mesas, creating small pockets of
natural parkland scattered throughout the city.
The same canyons give parts of the city a highly
segmented feel, creating literal gaps between
otherwise proximal neighborhoods and contributing
to a low-density, car-centered built environment.
Downtown San Diego is located on San Diego Bay.
Balboa Park lies on a mesa to the northeast. It
is surrounded by several dense urban communities
and abruptly ends in Hillcrest to the north. The
Coronado and Point Loma peninsulas separate San
Diego Bay from the ocean. Ocean Beach is on the
west side of Point Loma. Mission Beach and Pacific
Beach lie between the ocean and Mission Bay, a
man-made aquatic park. La Jolla, an affluent community,
lies north of Pacific Beach. Mount Soledad in
La Jolla offers views from northern San Diego
County to Mexico. Mountains rise to the east of
the city, and beyond the mountains are desert
areas. Cleveland National Forest is a half-hour
drive from downtown San Diego. Numerous farms
are found in the valleys northeast and southeast
of the city. San Diego County has one of the highest
count of animal and plant species that are on
the endangered species list than other counties
in the United States.
Communities and neighborhoods of San Diego:
Old Town, San Diego. Old Town, San Diego. Northern:
Bay Ho, Bay Park, Carmel Valley, Clairemont Mesa
East, Clairemont Mesa West, Del Mar Mesa, La Jolla,
La Jolla Village, Mission Beach, Mission Bay Park,
North City, North Clairemont, Pacific Beach, Pacific
Highlands Ranch, Torrey Hills, Torrey Pines, University
City Northeastern: Black Mountain Ranch, Carmel
Mountain Ranch, Miramar, Miramar Ranch North,
Mira Mesa, Rancho Bernardo, Rancho Encantada,
Rancho Peñasquitos, Sabre Springs, San Pasqual
Valley, Scripps Ranch, Sorrento Valley, Torrey
Highlands Eastern: Allied Gardens, Birdland, Del
Cerro, Grantville, Kearny Mesa, Lake Murray, Mission
Valley East, San Carlos, Serra Mesa, Tierrasanta
Western: Burlingame, Hillcrest, La Playa, Linda
Vista, Loma Portal, Midtown, Midway District,
Mission Hills, Mission Valley West, Morena, North
Park, Ocean Beach, Old Town, Point Loma Heights,
Roseville-Fleetridge, Sunset Cliffs, University
Heights, Wooded Area Central: Balboa Park, Bankers
Hill, Barrio Logan, City Heights, Downtown (Columbia,
Core, Cortez Hill, East Village, Gaslamp Quarter,
Horton, Little Italy, Marina), Golden Hill, Grant
Hill, Logan Heights, Memorial, Middletown, Sherman
Heights, South Park, Stockton Mid-City: City Heights
(comprising Azalea Park, Bayridge, Hollywood Park,
Castle, Cherokee Point, Chollas Creek, Colina
Del Sol, Corridor, Fairmount, Fox Canyon, Islenair,
Ridgeview/Webster Rolando, Swan Canyon, Teralta
East, Teralta West), College East, College West,
Darnall, El Cerrito, Gateway, Kensington, Normal
Heights, Oak Park, Talmadge Southeastern: Alta
Vista, Bay Terrace, Broadway Heights, Chollas
View, Emerald Hills, Encanto, Jamacha-Lomita,
Lincoln Park, Mountain View, Mt. Hope, Paradise
Hills, Shelltown, Skyline, Southcrest, Valencia
Park Southern: Egger Highlands, Nestor, Ocean
Crest, Otay Mesa, Otay Mesa West, Palm City, San
Ysidro, Tijuana River Valley
The
three largest sectors of San Diego's economy are
defense, manufacturing, and tourism respectively.
Several areas of San Diego (in particular La Jolla
and surrounding Sorrento Valley areas) are home
to offices and research facilities for numerous
biotechnology companies. Major biotechnology companies
like Neurocrine Biosciences and Nventa Biopharmaceuticals
are headquartered in San Diego, while many biotech
and pharmaceutical companies, such as BD Biosciences,
Biogen Idec, Integrated DNA Technologies, Merck,
Pfizer, Élan, Genzyme, Cytovance, Celgene and
Vertex, have offices or research facilities in
San Diego. There are also several non-profit biotech
institutes, such as the Salk Institute for Biological
Studies, the Scripps Research Institute and the
Burnham Institute. The presence of University
of California, San Diego and other research institutions
helped fuel biotechnology growth. In June 2004,
San Diego was ranked the top biotech cluster in
the U.S. by the Milken Institute.
San Diego is home to companies that develop wireless
cellular technology. Qualcomm Incorporated was
founded and is headquartered in San Diego; Qualcomm
is the largest private-sector technology employer
(excluding hospitals) in San Diego County.[14]
The largest software company in San Diego (acccording
to the San Diego Business Journal) is security
software company Websense Inc. Websense was founded
and is headquartered in San Diego.
The economy of San Diego is influenced by its
port, which includes the only major submarine
and shipbuilding yards on the West Coast, as well
as the largest naval fleet in the world. The cruise
ship industry, which is the second largest in
California, generates an estimated $2 million
annually from the purchase of food, fuel, supplies,
and maintenance services. Due to San Diego's military
influence, major national defense contractors,
such as General Atomics and Science Applications
International Corporation are headquartered in
San Diego. Tourism is also a major industry owing
to the city's climate. Major tourist destinations
include Balboa Park, the San Diego Zoo, Seaworld,
nearby Wild Animal Park and Legoland, the city's
beaches and golf tournaments like the Buick Invitational.
San Diego has several sports venues: Qualcomm
Stadium is the home of the NFL San Diego Chargers,
NCAA Division I San Diego State Aztecs, as well
as local high school football championships. Qualcomm
Stadium also hosts international soccer games,
Supercross events and formerly hosted Major League
Baseball. Three NFL Super Bowl championships and
many college football bowl games have been held
there. Balboa Stadium is the city's first stadium,
constructed in 1914, and former home of the San
Diego Chargers. Currently Balboa Stadium hosts
soccer, American football and track and field.
PETCO Park in downtown San Diego is the home of
Major League Baseball's San Diego Padres. The
ballpark is also the current home of the semi-final
and final games of the World Baseball Classic
series, having hosted the inaugural series championship
games in 2006. PETCO Park will be the home to
the 2009 World Baseball Classic semi-finals and
final as well. Other than baseball, PETCO Park
hosts other occasional soccer and rugby events.
The San Diego Sports Arena hosts basketball, and
has also hosted ice hockey, indoor soccer and
boxing. Cox Arena at Aztec Bowl on the campus
of San Diego State University hosts the NCAA Division
I San Diego State Aztecs men's and women's basketball
games. Torero Stadium at the University of San
Diego hosts college football and soccer, and the
Jenny Craig Pavilion at USD hosts basketball and
volleyball.
The San Diego State Aztecs (MWC) and the San Diego
Toreros (WCC) are NCAA Division I teams. The UCSD
Tritons (CCAA) are members of NCAA Division II
while the Point Loma Nazarene Sea Lions (GSAC)
are members of the NAIA. San Diego has been the
home of two NBA franchises, the first of which
was called the San Diego Rockets. The Rockets
represented the city of San Diego from 1967 until
1971. After the conclusion of the 1970-1971 season,
they moved to Texas where they became the Houston
Rockets. Seven years later, San Diego received
a relocated NBA franchise (the Buffalo Braves),
which was renamed the San Diego Clippers. The
Clippers played in the San Diego Sports Arena
from 1978 until 1984. Prior to the start of the
1984-1985 season, the team was moved to Los Angeles,
and is now called the Los Angeles Clippers. Other
sports franchises that represented San Diego include
the San Diego Conquistadors of the American Basketball
Association, the San Diego Sockers (which played
in various indoor and outdoor soccer leagues during
their existence), the San Diego Flash and the
San Diego Gauchos, both playing in different divisions
of the United Soccer League, the San Diego Spirit
of the Women's United Soccer Association, the
San Diego Mariners of the World Hockey Association,
and the San Diego Gulls who were in different
hockey leagues during each of their three incarnations.
The San Diego Riptide and the San Diego Shockwave
were indoor football teams that played at the
Sports Arena and Cox Arena, respectively. San
Diego has long been a candidate for a Major League
Soccer franchise, especially due to the city recording
FIFA World Cup television audiences which are
double the national average. Curiously, despite
positive language being expressed by the league,
the city, the media and the public, a franchise
continues to elude San Diego. That looks likely
to be finally rectified with San Diego considered
among the favourites to land one of three franchises
to be offered before 2010. The city does currently
have an active mens team playing in the fourth
level of American soccer, the San Diego Pumitas
but no approaches have been made to turn them
into an MLS team as yet.
According to education rankings released by the
U.S. Census Bureau, 40.4 percent of San Diegans
ages 25 and older hold bachelor's degrees. The
census ranks the city as the ninth most educated
city in the United States based on these figures.
Public colleges and universities in the city include
University of California, San Diego (UCSD), San
Diego State University (SDSU), and the San Diego
Community College District, which includes San
Diego City College, San Diego Mesa College, and
San Diego Miramar College. Private colleges and
universities in the city include Alliant International
University (AIU), Design Institute of San Diego
(DISD), John Paul the Great Catholic University,
National University, NewSchool of Architecture
and Design, Pacific Oaks College, The Art Institute
of California, San Diego, Point Loma Nazarene
University (PLNU),Woodbury University School of
Architecture's satellite campus, and University
of San Diego (USD) . There is one medical school
in the city, the UCSD School of Medicine. There
are three ABA accredited law schools in the city,
which include California Western School of Law,
Thomas Jefferson School of Law, and University
of San Diego School of Law. There is also one
unaccredited law school, Western Sierra Law School.
The Joint Mathematics Meeting of the MAA, that
is, Mathematical Association of America and AMS,
which denotes American Mathematical Society, took
place in San Diego, January, 2008.
The San Diego Unified School District, also known
as San Diego City Schools, is the school district
that serves the majority of the city, it includes
113 elementary schools, 23 middle schools, 4 atypical
schools, 10 alternative schools, 27 high schools
and 25 charter schools. In the northern part of
the county, Poway Unified School District and
San Dieguito Union High School District are districts
outside city limits, but serve several schools
within city limits. In the southern part of the
county, Sweetwater Union High School District
serves multiple schools within city limits, although
it is headquartered outside city limits. San Ysidro
School District (K-8) serves areas of San Diego
also served by Sweet Water Union High School District.
Del Mar Union Elementary School District and Solana
Beach Elementary School District serve areas of
San Diego also within San Dieguito.
|
|
|
MOLD
INSPECTION
ORANGE COUNTY -
MOLD INSPECTOR
MOLD DETECTION DOGS, AFFORDABLE,
THERMAL IMAGING, MOLD ALLERGY
Mold,
Molds, Moisture, Mildew,
Allergy, Asthma, Spore, Mould, Moldy, Certified Mold Inspection,
Mold Testing, Toxic Mold Testing, Black Mold, Mold Remediation,
Indoor Air Quality, Mold Abatement, Leak
Inspections, Mold
Spores, Water Damage, Odor Removal, Damp
|
|
Services Certified
Mold Inspections Thermal
Imaging Mold
Detection Dogs Leak
Inspections Toxic
Mold Testing
|
VISIT
OUR GREAT LINKS PAGE!
MOLDINSPECTORORANGECOUNTY.COM
MOLDINSPECTIONORANGECOUNTYALLERGYMILDEWASTHMAAIRQUALITYMOISTURE.COM
This Business was Awarded - Best in
Business, Orange County CA, Visit:
OrangeCountyCABusinessDirectory.com
Copyright
© Mold Inspector Orange County .com, JLC Inspections,
94 Frontier St. Trabuco Canyon, CA 92679
MOLD INSPECTION ORANGE COUNTY - MOLD INSPECTOR, MOLD DETECTION
DOGS, AFFORDABLE, THERMAL IMAGING, MOLD EMERGENCY, Mold,
Molds, Moisture, Mildew, Allergy, Asthma, Spore, Mould,
Moldy, Mold Testing, Leak Inspections, Toxic Mold Testing, Black
Mold, Mold Remediation, Indoor Air Quality, Mold Abatement,
Mold Spores, Water Damage, Odor Removal, Damp, IAQ, Mold Allergy,
Fungus, Fungi, How to Kill Mold, Symptoms Mold, Mold
Exposure, Mold Test, Mold and Mildew, Wood Mold, Drywall Mold,
Mold Exposure, Mold Cleanup, Bathroom Mold, Home Inspections,
Building Inspections, Water Damage Inspections, Mold Mildew,
House Mold, toxic
mold Orange County, Los Angeles mold inspection, Los Angeles
mold inspector, mold inspection in Los Angeles, mold inspector
Los Angeles, mold testing Los Angeles, Orange County mold inspection,
Orange County mold inspector, toxic mold Los Angeles, toxic
mold test Los Angeles, orange county mold,orange county,mold
inspection, ca,california public health,orange county mold inspector,hazmat
inspector,toxic mold inspection, Orange County California mold
inspection shows 26 molds are commonly found in water-damaged
properties. Orange County homes, Orange County schools, and
Orange County businesses are at high risk of indoor mold growth.
An Orange County mold inspector can answer your mold questions.mold
remediation, mold inspection, mold sampling, mold removal, mold
testing, mold clean up, mold cleanup, mold air sampling, toxic
mold, balck mold, mold inspection orange county, mold inspection
los angeles, toxic mold removal, balck mold cleanup, mold assessment,
mold abatement, mold surface sampling, mold health effects toxic
effects of mold, mildew, toxic mildew
California Home Inspection, California Home Inspections, Certified
Home Inspections, Certified Home Inspectors, California Mold
Inspection, California Mold Inspections, Home Inspection, Home
Inspections, Home Inspectors, Home Inspection, Home Inspections,
Home Inspectors, Home Inspector, Home Inspection checklists,
Home Inspection checklist, Home Inspection Services, House inspections,
House inspection, property inspection, California,Mold Testing,
Toxic Mold, Black Mold, certified mold inspector, certified
home inspector Orange
County Water Damage, Orange County Water Damage Restoration,
Orange County Mold Remediation, Orange County Carpet Cleaning,Water
Extraction,Structure Drying,Plumber,Content Drying,Orange County
Mildecide,Debris Removal Service,Fire Damage,Mold Removal,Mold
Containment,Plumbing, Fire,
Mold, Sewer, Dehumidifying, Slab Leaks
Aliso Viejo 92656, 92698, Anaheim 92801, 92802, 92803, 92804,
92805, 92806, 92807, 92808, 92809, 92812, 92814, 92815, 92816,
92817, 92825, 92850, 92899, Atwood, 92811, Brea, 92821, 92822,92823,
Buena Park, 90620 ,90621,90622, 90624, Capistrano Beach, 92624,
Corona del Mar, 92625, Costa Mesa, 92626, 92627, 92628, Cypress,
90630, Dana Point, 92629, East Irvine, 92650, El Toro, 92609,
Foothill Ranch, 92610, Fountain Valley, 92708, 92728, Fullerton,
92831, 92832, 92833, 92834, 92835, 92836, 92837, 92838, Garden
Grove, 92840, 92841, 92842, 92843 ,92844, 92845, 92846, Huntington
Beach , 92605, 92615, 92646, 92647, 92648, 92649, Irvine, 92602,
92603, 92604, 92606, 92612, 92614, 92616, 92617, 92618, 92619,
92620, 92623, 92697, La Habra, 90631, 90632, 90633, La Palma,
90623, Ladera Ranch, 92694, Laguna Beach , 92651, 92652, Laguna
Hills ,92653, 92654,92607,92677, Laguna Woods, 92637,Lake Forest,
92630, Los Alamitos, 90720, 90721, Midway City, 92655, Mission
Viejo, 92690, 92691, 92692,Newport Beach , 92658, 92659, 92660,
92661, 92662, 92663, 92657, Orange, 92856, 92857, 92859, 92862,
92863, 92864, 92865, 92866, 92867, 92868, 92869, Placentia,
92870, 92871, Rancho Santa Margarita 92688, San Clemente, 92672,
92673, 92674, San Juan Capistrano, 92675, 92693, Santa Ana ,
92701, 92702, 92703, 92704, 92705 ,92706, 92707, 92711, 92712,
92725.92735, 92799, Seal Beach , 90740,
Silverado 92676, Stanton, 90680, Sunset Beach 90742, Surfside
90743, Trabuco Canyon, 92678, 92679, Tustin ,92780, 92781,92782,
Villa Park, 92861, Westminster, 92683, 92684, 92685, Yorba Linda,
92885, 92886, 92887, San
Diego 92101, 92102, 92103, 92104, 92105, 92106, 92107, 92108,
92109, 92110, 92111, 92112, 92113, 92114, 92115, 92116, 92117,
92118, 92119, 92120, 92121, 92122, 92123, 92124, 92126, 92127,
92128, 92129, 92130, 92131, 92132, 92133, 92134, 92135, 92136,
92137, 92138, 92139, 92140, 92142, 92143, 92145, 92147, 92149,
92150, 92152, 92153, 92154, 92155, 92158, 92159, 92160, 92161,
92162, 92163, 92164, 92165, 92166, 92167, 92168, 92169, 92170,
92171, 92172, 92173, 92174, 92175, 92176, 92177, 92178, 92179,
92182, 92184, 92186, 92187, 92190, 92191, 92192, 92193, 92194,
92195, 92196, 92197, 92198, 92199,
Los Angeles, 90001, 90002, 90003, 90004, 90005, 90006, 90007,
90008, 90009, 90010, 90011, 90012, 90013, 90014, 90015, 90016,
90017, 90018, 90019, 90020, 90021, 90022, 90023, 90024, 90025,
90026, 90027, 90028, 90029, 90030, 90031, 90032, 90033, 90034,
90035, 90036, 90037, 90038, 90039, 90040, 90041, 90042, 90043,
90044, 90045, 90046, 90047, 90048, 90049, 90050, 90051, 90052,
90053, 90054, 90055, 90056, 90057, 90058, 90059, 90060, 90061,
90062, 90063, 90064, 90065, 90066, 90067, 90068, 90069, 90070,
90071, 90072, 90073, 90074, 90075, 90076, 90077, 90078, 90079,
90080, 90081, 90082, 90083, 90084, 90086, 90087, 90088, 90089,
90091, 90093, 90094, 90095, 90096, 90097, 90099, 90101, 90102,
90103, 90174, 90185, 90189, 91331, 91335, Beverly Hills, 90209,
90210, 90211, 90212, 90213, Glendale, 91201, 91202, 91203, 91204,
91205, 91206, 91207, 91208, 91209, 91210, 91214, 91221, 91222,
91224, 91225, 91226,
|
|